X
PrevPrev Go to previous topic
NextNext Go to next topic
Last Post 30 Oct 2018 09:16 AM by  Abzal Zhamalov
KazEOSat-1/2 sattelites support
 4 Replies
Sort:
You are not authorized to post a reply.
Author Messages

Abzal Zhamalov



New Member


Posts:2
New Member


--
28 Oct 2018 09:03 PM
    Dear Mr. or Ms.

    We have a several stereo scenes of KazEOSat-1/2 satellies (https://directory.eoportal.org/web/eoportal/satellite-missions/k/kazeosat-1)

    We should to make a processing
    1. Create DEM
    2. Orthoresampling

    We tried to find the KazEOSat satellite sensor model among the supported satellites but we couldn't do it

    Do ENVI support KazEOSat satellite sensor model and we have a photogrammetric processing of data???

    regards

    MariM



    Veteran Member


    Posts:2396
    Veteran Member


    --
    29 Oct 2018 12:11 PM
    ENVI does not have any specific support for KazEOSat-1/2. The link you provided is not currently available. If the sensor is not listed in the Photogrammetry module as a supported sensor, then you cannot use that tool for orthorectification:
    https://www.harrisgeospatial.com/docs/SupportedImageFormats.html

    However, if the data come with RPC information, then you might be able to use the RPC Orthorectification and Generate Point Cloud and DSM tool:
    https://www.harrisgeospatial.com/docs/generatepointclouds.html

    Abzal Zhamalov



    New Member


    Posts:2
    New Member


    --
    30 Oct 2018 05:03 AM
    Dear Mr. Minary

    thank you for reply

    Sorry
    there is new active link
    https://earth.esa.int/web/eoportal/satellite-missions/k/kazeosat-1

    Can I process a block of KazEOSat-1 satellite images in one project with extraction of DEM files and further ortorectify them???

    regards
    Abzal

    MariM



    Veteran Member


    Posts:2396
    Veteran Member


    --
    30 Oct 2018 08:47 AM
    This doesn't tell me anything about the data format or whether or not the data come with RPC (rational polynomial coefficient) information to perform orthorectification or extract a DEM. You might want to contact your local distributor and work with them on how to import the data and work with it in ENVI.

    Abzal Zhamalov



    New Member


    Posts:2
    New Member


    --
    30 Oct 2018 09:16 AM
    Dear Mari

    thank you

    regards
    You are not authorized to post a reply.