Hints in case SARscape menu does not display in ENVI

 

This article includes 3 proposals in case the SARscape menu does not display in ENVI toolbox after installing SARscape on Windows.

 

1.  Option 1:

• Close ENVI
• Disable any antivirus installed on the machine
• Run again the SARscape installer as administrator
• Check if the SARscape menu is now available in ENVI Toolbox
• Re-enable the antivirus afterwards

 

2.  Option 2:

• Close ENVI
• Open the Environment Variable panel
• Check the WINDIR variable and confirm if the file SARscape_configuration.ini is located under this directory. For example, if WINDIR is set to C:\Windows, SARscape_configuration.ini should be located under C:\Windows
• If it is not the case,  create  a SARscape_configuration.ini file in the WINDIR path and add the following lines in it - please adjust the paths if needed-:

C:\Program Files\SARMAP SA\SARscape\auxiliary\key_files\

C:\Program Files\SARMAP SA\SARscape\mandatory\

C:\Program Files\SARMAP SA\SARscape\work\

C:\Program Files\SARMAP SA\SARscape\bin\

C:\Program Files\SARMAP SA\SARscape\auxiliary\map_files\

C:\Program Files\SARMAP SA\SARscape\auxiliary\description_files\

C:\Program Files\SARMAP SA\SARscape\auxiliary\xml_parameters_definition\

C:\Program Files\SARMAP SA\SARscape\auxiliary\six_schema\

C:\Program Files\SARMAP SA\SARscape\auxiliary\api_description\

C:\Program Files\SARMAP SA\SARscape\auxiliary\xml_schema_files\

LSBF

ACTIVE

C:\Program Files\SARMAP SA\SARscape\license\

NaN

• Check if the SARscape menu is now available in ENVI Toolbox

 

3.  Option 3:

• Close ENVI
• Open the below folder - adjust the path if needed-

C:\Program Files\SARMAP SA\SARscape\config_file\

• Run as administrator the below file

update_envi_extensions.exe

• Check if the SARscape menu is now available in ENVI Toolbox

 

4.  If none of the above options help:

• Open the Environment Variable panel
• Check the path set for the TEMP variable . By default it should be

C:\Users\%USERPROFILE%\AppData\Local\Temp

• Move to that path and copy the file called

install_SARscape.trace_.txt

• Move to  

C:\Program Files\SARMAP SA\SARscape\

• Copy the file called

uninsca.dat

• Send those 2 files to Tech Support

 

 

 

 

--------------------------------------------

created by BC on 7/5/2022

reviewed by MM on 7/18/22