Use this procedure to convert from slant to ground range.
Syntax
ENVI_DOIT, 'SLT2GND_DOIT', DIMS=array, FID=file ID, HEIGHT=value, /IN_MEMORY, /LEFT_LOOK, NR_RANGE=value, OUT_BNAME=string array, OUT_NAME=string, PS_OUTPUT=value, PS_SLANT_RANGE=value, POS=array, R_FID=variable, RANGE_DIR=value, RESAMPLING={0 | 1 | 2}
Keywords
DIMS
The “dimensions” keyword is a five-element array of long integers that defines the spatial subset (of a file or array) to use for processing. Nearly every time you specify the keyword FID, you must also specify the spatial subset of the corresponding file (even if the entire file, with no spatial subsetting, is to be processed).
- DIMS[0]: A pointer to an open ROI; use only in cases where ROIs define the spatial subset. Otherwise, set to -1L.
- DIMS[1]: The starting sample number. The first x pixel is 0.
- DIMS[2]: The ending sample number
- DIMS[3]: The starting line number. The first y pixel is 0.
- DIMS[4]: The ending line number
To process an entire file (with no spatial subsetting), define DIMS as shown in the following code example. This example assumes you have already opened a file using ENVI_SELECT or ENVI_PICKFILE:
envi_file_query, fid, dims=dims
FID
The file ID (FID) is a long-integer scalar with a value greater than 0. An invalid FID has a value of -1. The FID is provided as a named variable by any routine used to open or select a file. Often, the FID is returned from the keyword R_FID in the ENVIRasterToFID routine. Files are processed by referring to their FIDs. If you work directly with the file in IDL, the FID is not equivalent to a logical unit number (LUN).
HEIGHT
Use this keyword to specify the instrument height in meters.
IN_MEMORY
Set this keyword to specify that output should be stored in memory. If you do not set IN_MEMORY, output will be stored on disk and you must specify OUT_NAME (see below).
LEFT_LOOK
Set this keyword to specify that the instrument was left-looking in the range direction.
NR_RANGE
Use this keyword to specify the instrument near range in meters.
OUT_BNAME
Use this keyword to specify a string array of output band names.
OUT_NAME
Use this keyword to specify a string with the output filename for the resulting data. If you set the keyword IN_MEMORY, you do not need to specify OUT_NAME.
PS_OUTPUT
Use this keyword to specify the pixel size (in meters) of the ground-range data.
PS_SLANT_RANGE
Use this keyword to specify the pixel size (in meters) in slant range.
POS
Use this keyword to specify an array of band positions, indicating the band numbers on which to perform the operation. This keyword indicates the spectral subset of bands to use in processing. POS is an array of long integers, ranging from 0 to the number of bands minus 1. Specify bands starting with zero (Band 1=0, Band 2=1, etc.) For example, to process only Bands 3 and 4 of a multi-band file, POS=[2, 3].
POS is typically used with individual files. The example code below illustrates the use of POS for a single file with four bands of data:
pos=[0,1,2,3]
envi_doit, 'envi_stats_doit', dims=dims, fid=fid, pos=pos, $
comp_flag=3, dmin=dmin, dmax=dmax, mean=mean, stdv=stdv, hist=hist
But what if you need to create an output file consisting of data from different bands, each from different files? Library routines such as CF_DOIT and ENVI_LAYER_STACKING_DOIT can accomplish this, but they use the POS keyword differently. Suppose you have four files, test1, test2, test3, and test4, with corresponding FIDs of fid1, fid2, fid3, and fid4, respectively. In the following example, you want Band 3 from test1 in the first position, Band 2 from test2 in the second position, Band 6 from test3 in the third position, and Band 4 from test4 in the fourth position. The code should be as follows:
fid_array = [fid1,fid2,fid3,fid4]
pos=[2,1,5,3]
envi_doit, 'cf_doit', dims=dims, fid=fid_array
out_name='test_composite_file'
R_FID
ENVI Classic library routines that result in new images also have an R_FID, or “returned FID.” This is simply a named variable containing the file ID to access the processed data. Specifying this keyword saves you the step of opening the new file from disk.
RANGE_DIR
Use this keyword to specify the range direction. If you do not specify this keyword, then the range direction is assumed to be in the samples direction. If you specify this keyword, then the range direction is in the line direction.
RESAMPLING
Use this keyword to specify the pixel resampling method. Set RESAMPLING to one of the following.
- 0: Nearest neighbor
- 1: Bilinear
- 2: Cubic convolution
API Version
4.3